Applications
Roads and parking lots
Fabric for heavily used roads carrying cars and trucks, and for car parks. Reinforces and separates the pavement layers.
Geotex 300
Fabric for heavily used roads carrying cars and trucks, and for car parks. Reinforces and separates the pavement layers.
Technical specifications
Mass per unit area
300 g/m² (min. 285)
Tensile strength, MD / CMD
15,5 / 20,5 kN/m
Elongation at break, MD / CMD
70 / 55,5 %
Thickness under 2 kPa load
3,0 mm
Static puncture strength (CBR)
657 Н
Permeability coefficient (2 kPa)
18 m/day
Puncture resistance (cone drop method)
≤ 500 mm
Frost resistance
≥ 80 %
Chemical resistance
≥ 80 %
Raw material
100 % polypropylene (PP)
Bonding method
Needle-punched, optionally thermally bonded
Roll width
0,3–6,3 м
Roll length
10–350 м
Compliance
National standard of Uzbekistan (O‘zMSt)
Parameters per the national standard of Uzbekistan (O‘zMSt), grades PG PP / PGT PP (polypropylene). Strength values are normative minimums. Roll dimensions and intermediate grades by agreement with the customer.
Installation
Unroll along the direction of traffic with a 300–500 mm overlap. Tip crushed stone forward from the placed layer, with no equipment driving over exposed fabric. Avoid punctures and tears.
Storage
Store in closed, dry premises away from direct sunlight, at least 1 m from heating devices, at temperatures up to 40 °C. Rolls are stored upright, stacked no more than two rows high. Guaranteed shelf life is 2 years from the date of manufacture.