Skip to content

Applications

Cushioning layers Drainage systems Erosion control Slopes and water bodies

Engineering protection and ecology

Fabric for cushioning and separation layers, drainage systems and erosion control on slopes and near waterways.

Geotex 700

Fabric for cushioning and separation layers, drainage systems and erosion control on slopes and near waterways.

Technical specifications

Mass per unit area

700 g/m² (min. 685)

Tensile strength, MD / CMD

17,5 / 65,5 kN/m

Elongation at break, MD / CMD

100 / 62 %

Thickness under 2 kPa load

6,0 mm

Static puncture strength (CBR)

1140 Н

Permeability coefficient (2 kPa)

18 m/day

Puncture resistance (cone drop method)

≤ 500 mm

Frost resistance

≥ 80 %

Chemical resistance

≥ 80 %

Raw material

100 % polypropylene (PP)

Bonding method

Needle-punched, optionally thermally bonded

Roll width

0,3–6,3 м

Roll length

10–350 м

Compliance

National standard of Uzbekistan (O‘zMSt)

Parameters per the national standard of Uzbekistan (O‘zMSt), grades PG PP / PGT PP (polypropylene). Strength values are normative minimums. Roll dimensions and intermediate grades by agreement with the customer.

Installation

Lay without tension, allowing for folds; overlap from 500 mm. No sharp inclusions where in contact with the membrane. Protect from mechanical damage.

Storage

Store in closed, dry premises away from direct sunlight, at least 1 m from heating devices, at temperatures up to 40 °C. Rolls are stored upright, stacked no more than two rows high. Guaranteed shelf life is 2 years from the date of manufacture.

Contact us

Request a quote for your project

A manager will get back to you within 30 minutes during business hours. We'll send a sample, a data sheet and a quote for your task.

Phone Telegram