Applications
Engineering protection and ecology
Fabric for cushioning and separation layers, drainage systems and erosion control on slopes and near waterways.
Geotex 700
Fabric for cushioning and separation layers, drainage systems and erosion control on slopes and near waterways.
Technical specifications
Mass per unit area
700 g/m² (min. 685)
Tensile strength, MD / CMD
17,5 / 65,5 kN/m
Elongation at break, MD / CMD
100 / 62 %
Thickness under 2 kPa load
6,0 mm
Static puncture strength (CBR)
1140 Н
Permeability coefficient (2 kPa)
18 m/day
Puncture resistance (cone drop method)
≤ 500 mm
Frost resistance
≥ 80 %
Chemical resistance
≥ 80 %
Raw material
100 % polypropylene (PP)
Bonding method
Needle-punched, optionally thermally bonded
Roll width
0,3–6,3 м
Roll length
10–350 м
Compliance
National standard of Uzbekistan (O‘zMSt)
Parameters per the national standard of Uzbekistan (O‘zMSt), grades PG PP / PGT PP (polypropylene). Strength values are normative minimums. Roll dimensions and intermediate grades by agreement with the customer.
Installation
Lay without tension, allowing for folds; overlap from 500 mm. No sharp inclusions where in contact with the membrane. Protect from mechanical damage.
Storage
Store in closed, dry premises away from direct sunlight, at least 1 m from heating devices, at temperatures up to 40 °C. Rolls are stored upright, stacked no more than two rows high. Guaranteed shelf life is 2 years from the date of manufacture.