Applications
Engineering protection and ecology
Our densest protective fabric: separation of mixed-fraction materials, thermal and acoustic insulation, higher bearing capacity of foundations, and protection of structures from mechanical damage.
Geotex 800
Our densest protective fabric: separation of mixed-fraction materials, thermal and acoustic insulation, higher bearing capacity of foundations, and protection of structures from mechanical damage.
Technical specifications
Mass per unit area
800 g/m² (min. 785)
Tensile strength, MD / CMD
17,5 / 70,0 kN/m
Elongation at break, MD / CMD
100 / 62 %
Thickness under 2 kPa load
7,5 mm
Static puncture strength (CBR)
1160 Н
Permeability coefficient (2 kPa)
18 m/day
Puncture resistance (cone drop method)
≤ 500 mm
Frost resistance
≥ 80 %
Chemical resistance
≥ 80 %
Raw material
100 % polypropylene (PP)
Bonding method
Needle-punched, optionally thermally bonded
Roll width
0,3–6,3 м
Roll length
10–350 м
Compliance
National standard of Uzbekistan (O‘zMSt)
Parameters per the national standard of Uzbekistan (O‘zMSt), grades PG PP / PGT PP (polypropylene). Strength values are normative minimums. Roll dimensions and intermediate grades by agreement with the customer.
Installation
Lay without tension, allowing for folds; overlap from 500 mm. No sharp inclusions where in contact with the membrane. Protect from mechanical damage.
Storage
Store in closed, dry premises away from direct sunlight, at least 1 m from heating devices, at temperatures up to 40 °C. Rolls are stored upright, stacked no more than two rows high. Guaranteed shelf life is 2 years from the date of manufacture.