Skip to content

Applications

Airport runways Railways Ballast layer Stabilisation

Heavy-duty transport infrastructure

High-strength fabric for airport runways and railways. Separates and stabilises under heavy loads.

Geotex 400

High-strength fabric for airport runways and railways. Separates and stabilises under heavy loads.

Technical specifications

Mass per unit area

400 g/m² (min. 385)

Tensile strength, MD / CMD

14,0 / 39,5 kN/m

Elongation at break, MD / CMD

100 / 60 %

Thickness under 2 kPa load

4,0 mm

Static puncture strength (CBR)

1050 Н

Permeability coefficient (2 kPa)

18 m/day

Puncture resistance (cone drop method)

≤ 500 mm

Frost resistance

≥ 80 %

Chemical resistance

≥ 80 %

Raw material

100 % polypropylene (PP)

Bonding method

Needle-punched, optionally thermally bonded

Roll width

0,3–6,3 м

Roll length

10–350 м

Compliance

National standard of Uzbekistan (O‘zMSt)

Parameters per the national standard of Uzbekistan (O‘zMSt), grades PG PP / PGT PP (polypropylene). Strength values are normative minimums. Roll dimensions and intermediate grades by agreement with the customer.

Installation

Unroll along the direction of traffic with a 300–500 mm overlap. Tip crushed stone forward from the placed layer, with no equipment driving over exposed fabric. Avoid punctures and tears.

Storage

Store in closed, dry premises away from direct sunlight, at least 1 m from heating devices, at temperatures up to 40 °C. Rolls are stored upright, stacked no more than two rows high. Guaranteed shelf life is 2 years from the date of manufacture.

Contact us

Request a quote for your project

A manager will get back to you within 30 minutes during business hours. We'll send a sample, a data sheet and a quote for your task.

Phone Telegram