Applications
Private sector roads
Separation layer for low-use roads and private sites. Keeps crushed stone from being pressed into the soil.
Geotex 200
Separation layer for low-use roads and private sites. Keeps crushed stone from being pressed into the soil.
Technical specifications
Mass per unit area
200 g/m² (min. 195)
Tensile strength, MD / CMD
5,0 / 15,0 kN/m
Elongation at break, MD / CMD
85 / 55 %
Thickness under 2 kPa load
2,0 mm
Static puncture strength (CBR)
523 Н
Permeability coefficient (2 kPa)
18 m/day
Puncture resistance (cone drop method)
≤ 500 mm
Frost resistance
≥ 80 %
Chemical resistance
≥ 80 %
Raw material
100 % polypropylene (PP)
Bonding method
Needle-punched, optionally thermally bonded
Roll width
0,3–6,3 м
Roll length
10–350 м
Compliance
National standard of Uzbekistan (O‘zMSt)
Parameters per the national standard of Uzbekistan (O‘zMSt), grades PG PP / PGT PP (polypropylene). Strength values are normative minimums. Roll dimensions and intermediate grades by agreement with the customer.
Installation
Side overlap of adjacent sheets from 300 mm, end overlap from 600 mm. Fill layer before compaction from 150 mm. Do not tension the fabric during installation or damage it with sharp objects.
Storage
Store in closed, dry premises away from direct sunlight, at least 1 m from heating devices, at temperatures up to 40 °C. Rolls are stored upright, stacked no more than two rows high. Guaranteed shelf life is 2 years from the date of manufacture.